Construction / CALCULATOR

Ramp Slope Calculator

Calculate ramp slope with explicit inputs and a worked example.

Runs on your deviceUpdates as you typeFormula & example ↓
01

Your inputs

Adjust the values to explore a different result.

m
Enter rise in m.
m
Enter horizontal run in m.

Formula

grade = rise / run × 100; length = √(rise² + run²)
  • Use the units shown beside each field.
  • Results update automatically whenever you change an input.
  • Displayed values use up to four decimal places, or scientific notation for very small or large numbers. Calculations use standard floating-point arithmetic; exact integer and fraction tools identify their own precision rules.
  • Geometry only; does not certify accessibility or code compliance.

Example Calculation

Example inputs
  • Rise: 0.5 m
  • Horizontal run: 10 m

A 0.5 m rise over 10 m horizontal run is a 5% grade.

Frequently asked questions

How do I use this calculator?

Enter rise, horizontal run. The result updates automatically. Use Reset to restore the example values.

What method does it use?

grade = rise / run × 100; length = √(rise² + run²). Geometry only; does not certify accessibility or code compliance.

Why might a rounded result differ?

The calculation keeps full numeric precision internally, then rounds the displayed result. Rounding intermediate steps by hand can produce a slightly different answer.

Are my inputs saved online?

No. This calculator processes your inputs in your browser. A recently used list stores only calculator names on this device, not your entered values.

Check the assumptions and units before using this result. Read about calculation methods.